720 lt/day - 75 m³/day Stainless steel

Reverse Osmosis is the membrane filtration process applied to waters where classical purification systems are insufficient (seawater, water with high conductivity, well water, etc.), which separates all undesirable minerals from the water and aims to obtain pure water. Osmosis is a natural phenomenon and, in short, it is the movement of water from a less dense environment to a more dense environment. This process continues until osmotic balance is achieved. Reverse osmosis is the reversal of this osmotic flow. Aqualine Reverse Osmosis Systems successfully provide pure water as a result of this process. Aqualine Reverse Osmosis Systems can be produced in different designs and shapes according to customer requests.

Membrane sleeves FRP or Stainless steel
TFC Spiral wound membranes 2.5" and 4" diameter
SS304 stainless steel vertical centrifugal high pressure pump (in devices between BT 340-BT1540)
Brass body rotary type high pressure pump (for devices between BT 125/1 - BT 240)
St-37 epoxy painted carbon steel chassis
Cartridge filter with 5 micron precision
Low and high pressure pipes U-PVC / Zonder
automatic valves solenoid valve
Pressure adjustment valve at the pump outlet and waste water line (in devices between BT 340 - BT1540)
low pressure switch
Product water and wastewater scratch flow meters
Glycerin manometers
Product water conductivity indicator
RO electronic control card
220 V/50Hz/1ph (for devices between BT 125/1 -BT 240)
380 V/50Hz/3ph (on devices between BT 340-BT1540)
Antiscalant dosing system not included

INLET WATER LIMITS

Inlet water TDS: 0 - 2,000 ppm
Inlet water pressure: 2 to 5 bar
Inlet water pH range: 6-8
Silica (SiO2) Tolerance: Maximum 25 ppm
Minimum and maximum inlet water temperature (10ºC - 30ºC)
Maximum Iron (Fe) tolerance: 0.05 ppm, 0.2 ppm if ASC is dosed
There should be no Hydrogen Sulfide.
There should be no blurriness (NTU <1)
There should be no oil-grease
SDI < 5
There should be no microbiological contamination