1 m3/day – 30 m3 day

Reverse Osmosis is the membrane filtration process applied to waters where classical purification systems are insufficient (seawater, water with high conductivity, well water, etc.), which separates all undesirable minerals from the water and aims to obtain pure water. Osmosis is a natural phenomenon and, in short, it is the movement of water from a less dense environment to a more dense environment. This process continues until osmotic balance is achieved. Reverse osmosis is the reversal of this osmotic flow. Aqualine Reverse Osmosis Systems successfully provide pure water as a result of this process. Aqualine Reverse Osmosis Systems can be produced in different designs and shapes according to customer requests.

 Membrane sleeves FRP or Stainless steel
TFC Spiral wound membranes 2.5" and 4" diameter
AISI304 Quality stainless steel vertical centrifugal high pressure pump (ALFA340/440/540/640)
Brass body rotary type pump high pressure pump (ALFA125/140/240)
AISI304 quality stainless steel chassis
Cartridge filter with 5 micron precision
Low and high pressure pipes U-PVC zonder PN20
Inlet solenoid valve
Pressure adjustment needle valves at pump outlet and waste water line
Low and high pressure switch
Clean and waste water flow meters
Return flow meter (Only ALFA 340/440/540/640 available)
Glycerin manometers
Product water water conductivity indicator (0-2000µS/cm)
Autoflush system
On-Off switch
RO Electronic control card, alarm and status lamps
220V/50Hz/1ph ( ALFA 125/140/240 )
380V/50Hz/3ph (ALFA 340/440/540/640)
IP56 Control panel

Recommended Inlet Water Limits

Inlet water TDS: 0 - 2,000 ppm
Working pressure: 10 to 15 bar
Inlet water pressure: 2 to 5 bar
If hardness is more than 3 French, ASC dosage is required
pH range: 6 - 8
Silica (SiO2) Tolerance: 25 ppm max. @ 60% efficiency
Max. Inlet water temperature = 30º C Max.
Max Iron (Fe) tolerance: 0.05 ppm, 0.2 ppm if ASC is dosed
There should be no Hydrogen Sulfide.
There should be no blurriness (NTU <1)
There should be no oil-grease
SDI < 5
There should be no microbiological contamination